Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Greatwood, TX
Gate access control in Greatwood means working on 25-to-35-year-old ornamental iron driveway gates that were installed when the subdivision was first built, and those systems are now failing in clusters. The Beaumont clay under Fort Bend County shifts with every wet-dry cycle, which throws gate frames out of square and stresses the keypads, card readers, and intercom wiring mounted on them. If your gate opener still runs but the entry system won’t respond, call (346) 818-3319 and we’ll diagnose it on site.
Why Greatwood Homes Are Different
Greatwood was developed primarily in the late 1980s through the 1990s as a master-planned community, which means the original automated gates and operators across the neighborhood are hitting end-of-life at roughly the same time. You’ll see the pattern on any given street: four or five homes with Viking or LiftMaster openers from the original buildout, all showing the same corrosion and limit-switch drift. The uniformity works in your favor when it comes to repair speed, because we know exactly what was installed in which section of Greatwood and what typically breaks first.
Fort Bend County’s expansive clay soil is the underlying variable. It shrinks in drought and swells after rain, so gate posts heave and tilt, racking the frame out of square. The Brazos River corridor runs adjacent to Greatwood, and after a significant flood event or an extended rainy season, the low-lying grading on many lots lets standing water wick into underground conduit and reach the gate operator control boards. That’s why we check the conduit and board before we replace a motor, and why the documentation we leave behind matters: the next technician sees the photo record and the wiring diagram instead of guessing.
Every gate repair or replacement in Greatwood also requires Architectural Review Committee approval from the Greatwood Community Association. The HOA specs cover gate color, material, and style, so the written scope we provide before any work starts is built to match those ARC requirements. No weld, no motor swap, no keypad replacement happens until the spec is settled.
Our Main Greatwood Services
These are the three gate services Greatwood homeowners call about most, each with its own dedicated page for the full detail.
Gate Repair in Greatwood
Most repair calls in Greatwood start the same way: the gate won’t latch, it reverses mid-travel, or the motor runs but nothing moves. The clay soil causes post shift, and the humidity eats at hinges and control boards. We write the scope and the price before we touch anything, then document what we find and what we set. Gate Repair in Greatwood covers the full repair picture.
Gate Installation in Greatwood
New gates in Greatwood have to clear the Community Association’s Architectural Review Committee before the first post hole is dug. That means color, material, and style specs are part of the quote from day one. We measure on site, price in writing, and install with the same documentation standard we use on commercial jobs. Gate Installation in Greatwood has the detail.
Gate Motor & Opener in Greatwood
Older Greatwood homes often still run the original Viking or LiftMaster operators, and after 25-plus years of Fort Bend humidity, the control boards are the weak point. We service nine automation brands, so the question is never “do you need a new motor” but “what failed and what does it cost to fix.” Gate Motor & Opener in Greatwood explains the full motor and opener service.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Greatwood
Gate access control in Greatwood means keypads, card readers, phone entry, and video intercom systems mounted on gates that were installed during the original late-1980s and 1990s buildout. The electronics age, the Beaumont clay shifts the gate frames, and the humidity works its way into every connection. When a keypad stops responding or a card reader won’t read, the fix often starts with the wiring run and the ground, not the device itself. Our Gate Access Control work follows the same written-price, documented-record standard as every other service we run.
Keypad Entry
Signs you need it
The keypad beeps but the gate won’t open, or the keypad is dead at the box while the remote still works fine.
What it costs in Greatwood
Keypad replacement in Greatwood typically runs $290-$580, depending on whether the existing wiring can be reused and the keypad is HOA-compliant.
How we do it
We test voltage at the keypad, check the ground, replace or rewire the unit, program the codes, and photograph the settings before we leave.
Phone Entry
Signs you need it
The gate won’t dial out when a visitor presses the call button, or the call connects but the gate won’t trigger open.
What it costs in Greatwood
Phone entry system repair in Greatwood typically costs $350-$1,200, depending on the controller and whether the issue is the phone board or the gate relay.
How we do it
We trace the phone line or cellular connection, test the relay at the gate board, replace the faulty component, and leave a written record of every setting.
What Gate Access Control Costs in Greatwood
| Item | Typical range in Greatwood |
|---|---|
| Keypad replacement | $290-$580 |
| Phone entry system repair | $350-$1,200 |
| Video intercom installation | $800-$2,500 |
Can you replace a Greatwood keypad without changing the gate opener?
Yes. Keypads from most automation brands communicate with the opener via simple relay or wireless signal, so a new keypad rarely requires a new opener. We test the existing board first and only recommend replacement when the board itself has failed.
Does the Greatwood HOA need to approve a new keypad or intercom?
Yes. Any visible change to the gate or its mounted hardware requires Architectural Review Committee approval. We can prepare the written spec and photos for your ARC submission so the device style and placement are documented before the work is scheduled.
Gate Parts & Welding in Greatwood
Gate parts and welding in Greatwood means hinge replacement, post replacement, rail repair, custom welding, and gate rollers on ornamental iron and tubular steel gates that have spent 25 to 35 years in Fort Bend humidity. The clay soil under Greatwood heaves with every season, so posts shift and welds crack in predictable patterns. Our Gate Parts & Welding service handles the structural work that gets a gate square and solid again, with the same written price and photo documentation.
Hinge Replacement
Signs you need it
The gate sags on the latch side, the bottom edge scrapes the driveway, or the gate swings freely because a hinge pin has sheared.
What it costs in Greatwood
Hinge replacement in Greatwood typically runs $400-$1,500 per hinge, depending on the gate weight and whether the post needs reinforcing.
How we do it
We measure the frame and the hinge centers, cut and replace the hinge, shim the gate back to square, and photograph the final alignment.
Post Replacement
Signs you need it
The gate post leans visibly, the gate won’t latch because the strike plate moved, or the post is cracked at the base and the gate pulls away from the opener arm.
What it costs in Greatwood
Post replacement in Greatwood typically costs $1,200-$3,500 per post, including concrete and rework of the hinge or opener mounting.
How we do it
We dig out the old post and footing, set the replacement post in concrete, brace it until the concrete cures, and remount the gate and opener to the new post.
What Gate Parts & Welding Costs in Greatwood
| Item | Typical range in Greatwood |
|---|---|
| Hinge replacement | $400-$1,500 per hinge |
| Post replacement | $1,200-$3,500 per post |
| Rail repair | $200-$800 |
Do you weld ornamental iron gates in Greatwood?
Yes. We weld ornamental iron and tubular steel gates, including sag repairs, cracked rails, broken pickets, and custom brackets. The work is photographed and documented so you see exactly what was done and what it looked like before and after.
Can you match the original gate hardware from the 1990s in Greatwood?
Often yes. Many of the original gate hinges, rollers, and brackets used in the Greatwood buildout are still manufactured or have direct dimensional equivalents. We source in the Houston metro to keep the lead time short, and we show you the replacement part before it goes on.
Brands We Service in Greatwood
We service Linear, Viking, Ghost Controls, and DoorKing operators across Greatwood, along with five other automation brands. Common boards and limit switches for these systems are stocked locally, so turnaround on most repairs doesn’t wait on a shipped part. We can see the full our brands list here.
Pricing for Gate Repair in Greatwood, TX
| Service | Typical range in Greatwood |
|---|---|
| Keypad replacement | $290-$580 |
| Phone entry system repair | $350-$1,200 |
| Video intercom installation | $800-$2,500 |
| Hinge replacement | $400-$1,500 per hinge |
| Post replacement | $1,200-$3,500 per post |
| Rail repair | $200-$800 |
| Gate roller replacement | $250-$600 per roller |
What pushes a Greatwood gate repair price toward the top of the range is usually the condition of what’s behind the visible problem: clay-heaved posts, corroded conduits, or an operator board that took on water during a flood cycle. The written price we hand you before work starts is the price you pay, and it includes the documented photo record we leave behind.
Neighborhoods We Serve in Greatwood
We cover every section of Greatwood, and the communities below represent the range of the neighborhood’s gate hardware and terrain. Response time across the area runs same-day for most calls, with emergency service available around the clock.
- Stonebridge
- Lakeview
- Forest Bend
- The Estates at Greatwood
- Creek Ridge
Service Area - Cities Near Greatwood
Our gate repair and access control work in Greatwood extends to the surrounding Fort Bend and west Houston communities. The same written-price and photo-documentation standard applies in Katy, TX, Cinco Ranch, TX, Brookshire, TX, and Mission Bend, TX.
Serving Greatwood, TX - Our Local Coverage Area
We’re based in the Greatwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Greatwood
Same-day service is typical for most Greatwood calls, and we run emergency dispatch around the clock. A live person answers the phone at (346) 818-3319 any hour, so you will not leave a voicemail and wait for a callback when a gate is stuck open.
For visible changes, yes. Replacing hardware that matches the original style generally moves through the Architectural Review Committee quickly, but any material or color change requires prior approval. We prepare the spec and photos for the ARC as part of your written quote.
Yes. Every visit includes a photo record of what was found, what was adjusted or replaced, and the final state of the gate. You get the written record and the photos, and we file the same documentation in the job record so no future technician has to guess what was done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Greatwood Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.