Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Katy, TX
Access control on a Katy gate means one of two worlds: a keypad at a private driveway in Cinco Ranch or Grand Lakes, or a full card-reader and phone-entry system at an HOA monument entrance serving 400 homes. The housing stock here runs young, uniform, and deed-restricted, which means one thing for the work: when operators or entry hardware fail, they fail in waves across the same build year. We quote every access-control job in writing before any tool comes off the truck. Call (346) 818-3319 and you’ll get a live person, any hour, day or night.
Why Katy Homes Are Different
Katy sits on Houston Black Clay, a soil that expands when wet and contracts hard in a dry spell. Concrete gate post footings move with it, and a gate that closed perfectly in March is dragging on the striker by August. That single fact drives more service calls out here than any hardware failure. The housing stock compounds it: most Katy subdivisions went in between the 1990s and the 2020s as tract builds inside master-planned communities, so gates tend to be ornamental iron driveway units and automated community entry monuments, often the same model installed across dozens of streets in the same year. When one fails, its neighbors are usually close behind.
Then there’s the Harvey factor. Neighborhoods west of the Addicks Reservoir that flooded in 2017 had operators and buried wiring harnesses replaced quickly and cheaply in the months after the water receded. Those replacements are now six or seven years old. We’re seeing a measurable wave of controller and motor failures in the flooded subdivisions precisely where you’d expect it.
Our Main Katy Services
Most Katy homeowners and HOA boards call us about one of three things: a gate that stopped moving, a gate that needs to be built or replaced, or the motor and operator hardware behind a community entrance. Here’s what each looks like locally.
Gate Repair in Katy
Repair work in Katy usually starts with alignment on a shifting post or a dead operator board corroded by humidity. We diagnose on site, hand you a written price, and leave a photo record of what we found and what we set. Clay soil means repairs here are rarely one-and-done without an alignment check. Gate Repair in Katy covers swing gates, slide gates, and monument entrances.
Gate Installation in Katy
New gates in deed-restricted Katy subdivisions often need HOA approval before the first post hole is dug. We work with the board’s requirements, spec the gate to the existing column spacing, and install with the operator brand that matches the rest of the community when that matters. Every installation gets a written scope and a fixed price before we begin. Gate Installation in Katy covers driveway gates, pedestrian gates, and HOA monuments.
Gate Motor & Opener in Katy
Katy’s humidity shortens operator lifespan. Circuit boards corrode, motor brushes wear, and limit switches drift on units that have sat through a few wet summers. We service nine motor brands and we’ll repair what’s on your gate rather than pushing a replacement when a board or a limit switch will do. Gate Motor & Opener in Katy covers operator replacement, board repair, and full motor service.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Katy
Access control in Katy spans two very different jobs: the private driveway keypad that lets a homeowner in without getting out of the car, and the HOA monument system that manages hundreds of residents across a Cinco Ranch or Elyson subdivision. The hardware here is young but the humidity is relentless, and we see more callouts for corroded keypad terminals and misaligned exit sensors than for outright breakage. Gate Access Control is a core service; we carry the boards, readers, and reference parts to handle most repairs in one visit.
Keypad Entry
Signs you need it
Keypad buttons stop responding, the faceplate shows corrosion streaks from humidity, or codes work intermittently after rain.
What it costs in Katy
Keypad replacement at a Katy driveway or HOA entry typically runs $225-$550 depending on mounting style.
How we do it
We test the wiring, replace or rebuild the keypad, program the codes, and photograph the finished state.
Phone Entry
Signs you need it
Visitors can’t reach a resident, the unit dials out but no voice path connects, or the directory stops updating.
What it costs in Katy
Phone-entry hardware and programming usually runs $350-$900 at Katy HOA entry points.
How we do it
We check the phone line or cellular connection, replace the controller or handset if needed, and test three numbers on site.
What Gate Access Control Costs in Katy
| Item | Typical range in Katy |
|---|---|
| Keypad replacement | $225-$550 |
| Phone entry hardware | $350-$900 |
| Card reader install | $300-$700 |
Can you update the directory on a Katy HOA phone-entry system same day?
Yes. If the existing controller is functional, we can update resident directories and reprogram entry codes on the same visit. The work is quoted in writing before we make changes. Call (346) 818-3319 for a specific time.
Does Katy clay soil affect access-control alignment?
It does. Post movement throws safety sensors and photo-eyes out of line, which blocks the gate from operating. We check alignment on every access-control call because it’s the most common root cause in Katy. Call (346) 818-3319 to schedule a check.
Gate Parts & Welding in Katy
Parts and welding in Katy come down to two realities: iron gates on shifting clay pull apart at the hinges, and HOA monument gates rack up enough cycles that rollers and hinges wear on a schedule, not on a surprise. We stock common hinge sets, roller assemblies, and weld rod for ornamental iron, so most part failures are a one-visit fix. Gate Parts & Welding covers everything from a seized hinge on a 90s-era Cinco Ranch driveway gate to a full post reset after a dry summer.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the latch side, or the hinge pin is visibly worn or cracked.
What it costs in Katy
Hinge replacement on a Katy driveway gate typically runs $180-$400 depending on weight and whether we need to re-square the frame.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the new set, and recheck the swing.
Post Replacement
Signs you need it
The post leans, the gate no longer meets the striker, or visible cracks run through the concrete footing.
What it costs in Katy
Post reset or replacement in Katy’s clay soil usually runs $400-$900 with concrete work included.
How we do it
We remove the failed post, pour a new footing sized for the soil, set the post true, and rehang the gate.
What Gate Parts & Welding Costs in Katy
| Item | Typical range in Katy |
|---|---|
| Hinge replacement | $180-$400 |
| Post replacement | $400-$900 |
| Custom welding repair | $150-$450 |
Can you weld ornamental iron gates in Katy on site?
Yes. We carry mobile welding rigs for driveway and light commercial gates, and we can do most ornamental iron repairs on site in one visit. The price is written before any welding starts. Call (346) 818-3319.
Do Katy HOA entrances need different parts than private gates?
Usually yes. HOA monument gates run higher cycle counts and need commercial-grade rollers and hinge sets. We keep those parts stocked separately from residential inventory because the demand in Katy is steady. Call (346) 818-3319 with your gate type.
Brands We Service in Katy
We service Linear, Viking, Ghost Controls, and DoorKing operators out here, along with five other automation brands. Parts for the most common Katy HOA models are kept in local stock, so most repairs don’t wait on shipping. See our brands for the full lineup.
Pricing for Gate Repair in Katy, TX
| Service | Typical range in Katy |
|---|---|
| Gate repair diagnostic | $75-$150 |
| Swing gate motor replacement | $850-$1,600 |
| Slide gate operator replacement | $1,200-$2,300 |
| Gate installation (driveway) | $2,500-$6,000 |
| Gate installation (HOA monument) | $8,000-$20,000 |
| Keypad replacement | $225-$550 |
| Phone entry hardware | $350-$900 |
| Hinge replacement | $180-$400 |
| Post replacement | $400-$900 |
In Katy, the biggest price drivers are soil movement under the posts and corrosion inside the operator from humidity. We write the exact flat price and hand it to you before any work starts, so the number on the page is the number on the invoice.
Neighborhoods We Serve in Katy
We cover the full Katy footprint, from the older 1990s sections near Katy Mills to the newest builds in Elyson and Tamarron. Most calls get same-week scheduling, with emergency response available around the clock.
- Cinco Ranch
- Grand Lakes
- Elyson
- Cane Island
- Tamarron
Service Area - Cities Near Katy
Beyond Katy, our crews also cover nearby communities including Richmond, TX, Brookshire, TX, and Sugar Land, TX, along with Stafford, TX. Dispatch and scheduling are coordinated from the brand’s Houston office; the technician who arrives at your gate is local to the Katy area.
Serving Katy, TX - Our Local Coverage Area
We’re based in the Katy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Katy
Most Katy communities with automated entry monuments have a management company and board that must approve exterior work. We’re used to providing written scopes and specs for HOA review, and we can work directly with the management company. For private driveway gates, approval is rarely required. Call (346) 818-3319 with your subdivision’s rules and we’ll tell you what’s needed.
Yes. A live person answers the phone 24 hours a day, seven days a week, and we dispatch emergency gate calls in Katy on weekends and holidays. You won’t get a voicemail loop or a callback promise. Call (346) 818-3319 and you’ll speak to a person.
For most repairs, the written price is handed to you before any work starts, right there at the gate. For installations and larger access-control projects, we’ll do a free on-site measure and deliver a written scope within a day or two. The price doesn’t change after the work begins. Call (346) 818-3319 to schedule a visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Katy Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.