Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Brookshire, TX
Gate access control in Brookshire usually means one thing: a keypad or remote that stops talking to an operator sitting a quarter mile down a gravel drive. Most of the calls we run in the Brookshire area involve slide gates on acreage tracts along FM 1489 and FM 359, where the control wiring runs long distances through flood-prone ground. When the Brazos River rises or the Houston Black clay shifts, those systems fail in ways you simply don’t see in closer-in subdivisions. Call (346) 818-3319 and we’ll have a technician out to diagnose it, with the written price in your hand before any tool comes off the truck.
Why Brookshire Homes Are Different
Brookshire sits at the outer edge of Houston’s westward sprawl in Waller County’s agricultural fringe. The dominant property type here is large acreage tracts, many along FM 1489, FM 359, and the surrounding farm roads, with long gravel driveways secured by heavy pipe swing gates or automated slide gates. These are not the ornamental iron subdivision gates common in Katy or Sugar Land. The work profile is fundamentally different: agricultural-grade hardware, solar-powered operators on long runs away from utility power, and control boards that die from flood exposure.
Two conditions shape nearly every gate repair we do in Brookshire. First, the Brazos River floodplain puts automated operators and buried wiring harnesses underwater after major rain events, corroding boards and shorting sensors. Second, the expansive Vertisol clay under Brookshire heaves and settles gate posts several inches seasonally, knocking hinges out of alignment and slide-gate rails off their rollers. We see the same slide-gate derailment year after year: the concrete footing tilts, the roller alignment breaks, and the gate grinds to a stop halfway open.
Our Main Brookshire Services
These are the three jobs Brookshire homeowners call about most. Each has its own dedicated page with specific pricing, sub-jobs, and local notes.
Gate Repair in Brookshire
Gate repair in Brookshire means dealing with what the clay and the floodplain do to steel. We replace bent hinges, re-weld cracked pipe frames, rebuild slide-gate rollers, and troubleshoot operators that have taken on water. On most acreage properties, the gate is the only thing between the road and everything behind it, so we treat every repair as a security fix, not a convenience call. See Gate Repair in Brookshire for the full breakdown of common repairs and what they cost.
Gate Installation in Brookshire
New gate installations in Brookshire almost always involve long spans, heavy pipe or tube steel, and open ground with no existing infrastructure. We handle concrete footings sized for expansive clay, solar setups where utility power is out of reach, and slide gates on gravel approaches. Every install includes a written scope and a photo record before we pour or weld anything. Details are on the Gate Installation in Brookshire page.
Gate Motor & Opener in Brookshire
Motor and opener work in Brookshire skews heavily toward solar-powered operators and long wire runs. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we don’t steer you toward a replacement when the existing motor can be repaired. Flood-damaged boards are a common call after wet seasons here. See Gate Motor & Opener in Brookshire for the specific jobs and price ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Brookshire
Gate access control in Brookshire is about keeping a gate secure when the nearest neighbor is half a mile away and the driveway itself runs long enough that you can’t see who’s at the road. Homes here often have keypads or card readers mounted on pipe posts at the property line, wired back to an operator near the house or barn, and those wire runs are exactly what the floodplain and clay destroy. We handle keypad entry, remote control, phone entry, card readers, and video intercoms, and every repair includes a documented photo record of what was found and what was reset. That’s the standard we apply on every Gate Access Control job.
Keypad Entry
Signs you need it
The keypad lights up but the gate won’t move, or it accepts a code only intermittently, especially after rain.
What it costs in Brookshire
Keypad replacement or reprogramming in Brookshire typically runs $150-$350, depending on whether the wire run to the operator is intact.
How we do it
We test voltage at the keypad and the operator, replace or re-terminate the wiring, set new codes, and photograph the final configuration.
Phone Entry
Signs you need it
Callers hear ringing but the gate never opens, or the system drops the call after one ring.
What it costs in Brookshire
Phone entry repairs in Brookshire typically run $200-$500, with cellular-capable units at the higher end of that range.
How we do it
We confirm the phone line or cellular signal at the entry station, test the relay output to the operator, and replace the unit or the wiring as needed.
What Gate Access Control Costs in Brookshire
| Item | Typical range in Brookshire |
|---|---|
| Keypad replacement | $150-$350 |
| Phone entry replacement | $200-$500 |
| Remote control receiver | $120-$250 |
Can you add a keypad to an existing Brookshire gate?
Yes. Most operators accept a wired or wireless keypad, and we can run the wire along the fence line or set up a solar-powered wireless keypad where trenching isn’t practical. Call (346) 818-3319 and we’ll quote it in writing.
Do access control repairs need to wait for a trenching crew in Brookshire?
Not usually. Wireless keypads and solar-powered entry stations avoid trenching in most cases, and when a wire run is the problem we use a small trencher that handles the clay without a second crew. We’ll tell you which route the job actually needs.
Gate Parts & Welding in Brookshire
Gate parts and welding in Brookshire is often the difference between replacing a $4,000 gate and spending $400 to fix it. On acreage properties the gates themselves are usually heavy pipe or tube steel, and the failures are predictable: hinges torn out of shifting posts, slide rails kinked by clay movement, and rollers ground flat on gravel driveways. We carry common parts on the truck and weld on site, and every repair leaves a photographed record of the weld and the part number under our Gate Parts & Welding process.
Hinge Replacement
Signs you need it
The gate drags at the latch end, the hinge pin is visibly bent or loose, or the gate has started scraping the ground on one side.
What it costs in Brookshire
Hinge replacement in Brookshire typically runs $80-$220 per hinge, depending on the post condition and whether welding is needed.
How we do it
We cut off the old hinge, check the post for true, weld on a new hinge sized for the gate weight, and photograph the finished weld.
Gate Rollers
Signs you need it
The slide gate moves in jerks, makes a grinding noise, or hops off the track at the same spot every time.
What it costs in Brookshire
Roller replacement in Brookshire typically runs $100-$300 per assembly, with heavier agricultural-grade rollers at the top of that range.
How we do it
We lift the gate off the rail, inspect the track for kinks, press or weld in new rollers, and verify the roll test before we leave.
What Gate Parts & Welding Costs in Brookshire
| Item | Typical range in Brookshire |
|---|---|
| Hinge replacement | $80-$220 per hinge |
| Gate roller replacement | $100-$300 per assembly |
| Custom welding repair | $150-$600 per repair |
Do you weld on site in Brookshire?
Yes. Our trucks carry a welder and common steel stock, so most cracks, broken hinges, and rail repairs happen in one trip. You get a photo of the finished weld before we leave.
Can you match the paint on a repaired Brookshire gate?
We can match most common gate finishes closely, though exact color matching on old powder coat is imperfect. We’ll tell you honestly what the repair will look like before we start.
Brands We Service in Brookshire
We service Linear, Viking, Ghost Controls, and DoorKing operators in Brookshire, plus most other major brands. We stock common boards and limit switches locally so most repairs don’t wait on a parts shipment. See our brands for the full list of what we work on.
Pricing for Gate Repair in Brookshire, TX
| Service | Typical range in Brookshire |
|---|---|
| Keypad replacement | $150-$350 |
| Phone entry replacement | $200-$500 |
| Remote control receiver | $120-$250 |
| Hinge replacement | $80-$220 per hinge |
| Gate roller replacement | $100-$300 per assembly |
| Custom welding repair | $150-$600 per repair |
What pushes a Brookshire gate repair higher than average is the ground itself. Expansive clay that has moved a post several inches means we’re not just replacing a hinge, we’re re-setting a footing and re-aligning the rail, and that adds labor. Flood-damaged control boards or buried wiring also cost more than a simple motor swap. Whatever the number, it’s written down and agreed to before we start, under Clause 1 of the Haven Standard: have it in writing.
Neighborhoods We Serve in Brookshire
We work across Brookshire and the surrounding Waller County acreage communities, including properties along FM 1489, FM 359, and the farm roads that run east and south of town toward the Brazos. Most jobs are within a 30 to 45 minute response window from dispatch.
- Acreage tracts along FM 1489
- Properties along FM 359
- Farm roads east and south of town
- Brazos River floodplain properties
- Newer 1-10 acre tract developments
Service Area - Cities Near Brookshire
We regularly serve gate repair customers in Sealy, TX, Katy, TX, Richmond, TX, and Rosenberg, TX. Dispatch and scheduling are coordinated from the brand’s Houston office; crews serve Brookshire locally. The same written pricing and documented photo record applies everywhere we work.
Serving Brookshire, TX - Our Local Coverage Area
We’re based in the Brookshire area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Brookshire
Most Brookshire jobs are reached within 30 to 45 minutes from dispatch. A live person answers the phone 24/7, and we don’t route you through a voicemail queue. For a flood-damaged gate, call (346) 818-3319 and we’ll get a technician moving.
Most gate repairs don’t require a permit in Brookshire because they’re considered maintenance on an existing structure. New installations or major electrical runs may need Waller County approval, and we’ll tell you upfront if your job falls under that. We handle the scoping paperwork as part of the written quote.
Yes. Off-track slide gates from shifting Brookshire clay are one of the most common calls we run here. We lift the gate back onto the rail, correct the roller alignment, and if the footing is the root cause we’ll tell you plainly whether it needs to be re-poured. The fix usually holds because we address the footing, not just the visible derailment. Call (346) 818-3319 for a written quote.
If your Brookshire gate has stopped cooperating, call (346) 818-3319. We’ll name the problem, write the price down, and fix it right the first time. Free estimates, and the photo record is yours to keep.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brookshire Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.